Lafayette Metal BuildingsGet a Quote

Metal building permits in Hammond, Tangipahoa Parish and St. Tammany Parish, LA

On the Northshore, the parish permit office handles building permits for unincorporated land: Tangipahoa Parish has offices in Amite and Hammond, and St. Tammany Parish's Permits and Inspections office is in Mandeville. Inside Hammond, Covington, Mandeville, Slidell or another town, check with that city first. Here is what the official sources say.

Get a free metal building quote

About 30 seconds: ZIP, job type, name and phone. One independent local contractor follows up. Free, no obligation.

Free, no obligation. We never sell your details to multiple companies.

Where is the Tangipahoa Parish permit office?

Tangipahoa Parish has two permit offices: 113 North Bay Street, Amite, LA 70422, (985) 748-2024, and 15485 West Club Deluxe Road, Hammond, LA 70403, (985) 542-2117, both open Monday through Friday, 8 a.m. to 4 p.m. The parish also takes permit applications, fees, PDF plans and inspection requests online through the MyGovernmentOnline customer portal.

Request a free metal building quote

What Tangipahoa Parish asks for

The parish permit office says building permits are required through that office before any structure is built in Tangipahoa Parish, and that contractors and subcontractors must be registered with it. Its published building permit process is:

  1. Get an address for the property from the 911 office.
  2. Bring a survey or deed and your building plans to the permit office. The office does a flood determination and a plan review.
  3. Get sewer approval from Environmental Health (or the Tangipahoa Parish Sewer District if you are on it).
  4. Return with the plans, the completed building application, the sewer approval, a notarized homeowner affidavit if you are acting as your own contractor, the survey or deed, a DEQ storm water permit if you are building in a subdivision, and the permit fee.

A metal shop or barn with no plumbing may not need every step, so ask the office which items apply to your building before you order it.

Inside Hammond city limits

The City of Hammond has its own Building Department at 219 E. Robert Street, Hammond, LA 70401; the permits line listed on the city's site is (985) 277-5655. The city's building permit application says one building is allowed per permit application, separate permits are needed for electrical, plumbing and HVAC work, and starting work without a required city permit can lead to a stop work order and doubled permit fees. If your lot is in Ponchatoula, Amite City, Independence, Kentwood or another town, call that town hall and ask who issues permits there.

Where is the St. Tammany Parish permit office?

St. Tammany Parish Permits and Inspections is at 21454 Koop Drive, Building B, Mandeville, LA 70471, with customer hours Monday through Friday, 8 a.m. to 4 p.m.; the department's question line is 985-898-2574. Permits are applied for online through mypermitnow.org (Customer Portal, then New Account).

St. Tammany's rule for larger accessory buildings

Since the state's 2021 codes took effect on January 1, 2023, St. Tammany Parish requires an engineered exterior envelope framing plan, prepared and stamped by a Louisiana-licensed design professional, for accessory buildings over 1,000 square feet (and for new homes and additions over 500 square feet). For a large metal shop or barn, ask the builder early whether stamped drawings are included. The parish also says permits can be held for coastal use, form board certification or culvert data verification, so ask what applies to your lot. Inside Covington, Mandeville, Slidell, Abita Springs, Madisonville or Pearl River, check with the city or town first.

Small sheds and farm buildings

Louisiana law (R.S. 40:1730.30) limits how parishes enforce the state construction code on farm structures and on small residential accessory structures (up to 500 square feet, outside the highest wind-speed areas), but it also says parishes keep the power to require building permits for them. So even a small shed or barn can need a permit. Ask the permit office for your address.

Flood zones and wind

Both parishes check flood zones as part of permitting. Look up your lot on the FEMA Flood Map Service Center before you settle on a slab height (see our flood zone guide), and check the design wind speed for your address on the ASCE Hazard Tool (see our wind load guide).

What to settle with your contractor

Getting a quote through this site

This site is a free referral service run by Statecraft Systems LLC, not a builder. If you request a quote, we pass it to one independent local contractor, who quotes your project directly. Enter the ZIP code of the property; the contractor confirms whether they can serve it.

This guide is general information from the official sources listed below, not legal or engineering advice. Rules and fees change, so confirm with the permit office for your address.

General information only, not legal or engineering advice. Rules change, so confirm with the agency linked below or a licensed professional before you start work.

Sources

Last reviewed: October 2026.

Related: Metal shops & garages · Barns & ag buildings · Carports & RV covers · Request quotes · All guides

Request a free building quote