A kit price usually covers the steel package. In Lafayette, the permit, the engineered drawings, the slab and the erection can matter just as much. Check these before you order, using what Lafayette Consolidated Government (LCG) and Louisiana's licensing board publish.
Get a free metal building quote
About 30 seconds: ZIP, job type, name and phone. One independent local contractor follows up. Free, no obligation.
1. Make sure the kit comes with drawings LCG will accept
LCG's Building Codes page says a metal building (with steel columns, beams, girts and purlins), a pre-engineered building or a pole barn "requires a permit, floorplan, and an engineered stamped set of plans which includes the wind load certification." Before you pay, ask the seller whether stamped drawings with a wind load certification for your address are included or cost extra.
2. Check the wind rating against your address
LCG lists wind loads from the ASCE 7-16 wind charts. The free ASCE Hazard Tool shows the design wind speed for a specific address, so you can compare it with the rating on the kit quote. The engineer of record makes the final call (see our wind load guide).
3. Carports need a permit too
LCG lists carports and RV covers among the structures that need a residential permit. A small detached shed of no more than 200 sq ft on a movable foundation is exempt, but it must still meet setback rules (see our permit guide).
4. Plan the slab height before the kit arrives
If the lot is in a flood zone, elevation rules can decide how high the slab sits. In Lafayette's flood fringe, a new residential structure's lowest floor, including its mechanical and electrical equipment, must be at least 1 ft above base flood elevation. Check your lot on the FEMA Flood Map Service Center and see our flood guide.
5. Call 811 before anyone digs
Footings, piers, posts and slab work count as digging. Louisiana 811 asks for notice at least two business days ahead, excluding weekends and legal holidays (see our 811 guide).
6. Decide who erects it, and check their license
LSLBC's published thresholds include labor and materials: a residential license for residential construction over $50,000 and a commercial license for commercial projects of $50,000 or more. LSLBC's homeowner guide also says a home improvement registration doesn't cover structural work. If you hire an erector, look them up on LSLBC's free contractor search and get a written contract (see our hiring checklist).
Questions to ask the kit seller
- Are stamped, wind-certified drawings for my address in the price?
- What foundation and anchoring do the drawings call for, and who designs it?
- What is in the package: doors, windows, insulation, trim, gutters?
- Does the price include delivery and erection, or the steel only?
Want a local company to quote a complete job instead of a kit? Request a free quote.
General information only, not legal or engineering advice. Rules change, so confirm with the agency linked below or a licensed professional before you start work.
Sources
- Lafayette Consolidated Government: Building Codes
- ASCE Hazard Tool (design wind speed lookup by address)
- LCG: Building within a Floodplain
- FEMA Flood Map Service Center
- Louisiana 811: Homeowner Safe Digging Information
- Louisiana State Licensing Board for Contractors: Types of Licenses
- LSLBC: Contractor Search
Last reviewed: October 2026.
Related: Metal shops & garages · Carports & RV covers · Metal building vs. pole barn · All guides