Lafayette Metal BuildingsGet a Quote

How Much Does a Metal Building Cost in Lafayette, LA?

Short answer: national 2026 data from Angi puts a professionally built pole barn or metal-sided building at about $27,500 on average, with most projects between $15,000 and $50,000 (roughly $15 to $40 per square foot). A 30x40 building runs about $18,000 to $32,000, and a metal carport averages about $5,400 installed. These are national figures, not Lafayette quotes. Wind design, the slab, permits and site work in Acadiana can move your number, so get a written quote for your lot.

Get a free metal building quote

About 30 seconds: ZIP, job type, name and phone. One independent local contractor follows up. Free, no obligation.

Free, no obligation. We never sell your details to multiple companies.

Metal building cost by size (2026 national figures)

Angi's 2026 pole barn data gives these ranges for professionally built post-frame buildings. Pre-engineered steel buildings are priced differently by each supplier, so treat this as a starting point, not a quote.

SizeTypical useRange (2026, national)
30x40 (1,200 sq ft)Two-car garage, workshop$18,000–$32,000
40x60 (2,400 sq ft)Equipment storage, large shop$30,000–$55,000
60x100 (6,000 sq ft)Agricultural or commercial$60,000–$120,000

By finish level, Angi lists a basic shell at $15,000–$25,000, a shell with insulation and electrical at $25,000–$40,000, and a fully finished building with HVAC or plumbing at $40,000–$50,000 and up.

How much does a metal carport cost?

Angi's 2026 data puts metal carport installation at $2,700 to $7,800, about $5,400 on average, or roughly $10 to $30 per square foot installed. By size: single 12x20 about $2,400–$7,200, double 20x20 about $4,000–$12,000, triple 30x20 about $6,000–$18,000, and an 18x36 RV cover about $6,480–$19,440. Enclosed sides, gables, gutters and wind certification add to that. See our carports and RV covers page.

Costs on top of the building

What moves a Lafayette-area quote

How to compare quotes

Ask every company for the same scope in writing: size and eave height, steel gauge, doors and windows, insulation, engineered drawings, slab or site work, delivery, erection and permits. Check whether the job needs a Louisiana contractor license (see Louisiana contractor licensing).

Getting a quote through this site

This site is a free referral service run by Statecraft Systems LLC, not a builder. If you request a quote, we pass it to one independent local contractor, who quotes your project directly. Tell us the size you have in mind, what it's for and whether you need a slab.

General information only, not legal or engineering advice. Rules change, so confirm with the agency linked below or a licensed professional before you start work.

Sources

Last reviewed: October 2026.

Related: Metal shops & garages · Barns & ag buildings · Carports & RV covers · Metal building vs pole barn · Request quotes · All guides

Request a free building quote